Converts RF signals to X10 commands , Built-in appliance module How It Works The RR501 transceiver module picks up radio frequency (RF) signals from X10 wireless remotes and then converts those signals into X10 commands, which are sent over your power lines. If more than one transceiver is used on the same House Code, X10 signal collisions may result. The RR501 transceiver module picks up radio frequency (RF) signals from wireless remotes and then converts those signals into commands, which are sent over your... Responds To RF & X10 Signals If you want to control X10 modules with a wireless controller, plug in the X10 RR501 Wireless Base Transceiver Module. When an X10 Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright. Technical Details Manufacturer Part #: RR501, UPC: 099081120011 The module can be controlled by various X10 powerline and X10 RF remotes. Transceiver X10 RR501 Power Requirements: 120 VAC, 60 Hz, Load Rating:, Resistive: 15 Amps, Incandescent: 500W, TV: 400W, Motor: 1/3 HP, Dimmable: No, Dimensions: 4., 25(H) x 2., 75(W) x 1., 25(D) inches, Warranty: 120 Day It still doesn’t work after a Laying On of Hands X10 Transceivers Compared – PAT03/RR501 vs TM751 As two-way transceivers, the RR501 and PAT03 transceiver models (PAT03 sold separately) offer advanced features over the TM751 transceiver model (sold separately). Rf Transceiver Module X10 16 Channel Wireless Transceiver X10 Wireless Base Transceiver Module (RR501 X10 Pro X10 Controller In contrast, this RR501 model receives both RF signals and X10 powerline signals, allowing you to control the built-in module either wirelessly or over the powerline, and to receive status reports over the powerline. 2.4G Transceiver Module with PA (power amplifier) - DL-24PA - DreamLNK (China Ma The Wireless Transceiver then converts the RF signal into an X10 signal and transmits it through your home's electrical wiring to X10 Receivers. Note: Use only one RF Base Transceiver Module or X10 Security Console (which also converts RF signals into X10 signals) per House Code.
