Dashcam Bateria WOLFBOX USB C Acc Hardwire Kit For G900PRO/G850PRO/G840S/G900/G850/G930/ G840H/i07/i17/X5, Hard Wire Car Charger Cable Kit 12V- 24V To 5V For Dash Cameras With Battery Drain Protection Cámara Vigilancia Coche Aparcado 5V/3A steady output, voltage input supports from 12V-24V. Install An Add-A-Fuse Tap If you are using the previously identified fuse slot that has an existing fuse in it, then insert that existing fuse into the lower empty slot of the Add-A-Fuse with correct orientation. A fuse Slot that provides constant power, A fuse Slot that only provides power when you turn your key to ACC position. 1 of GKU Dash Cam Hardwire Kit, Acc Hard Wire Car Camera Charger Cable Kit 12V- 24V to 5V Car Dash Camera Charger Power Cord with Battery Drain Protection (Hardwire kit YELLOW: Turn OFF the car. It is getting power through the always hot fuse slot. The Ground cable should be connected to the vehicle body. If YES, then great job. Locate The Fleet’s Fuse Box Locate your vehicle's fuse box using your Fuse Box Diagram. Power Supply Directly to the ignition wire for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger. Low Voltage Protection & Real-Time Display: Our hardwire kit offers 3 voltage protection levels, ensuring your dash cam stays powered... The red battery cable should be connected to constant power. We recommend that you choose the metal Chassis Grounding Screw, or it may cause your dash cam to not function properly and restart/reboot when power does not flow properly. Now touch the voltmeter to end of RED Add-A-Fuse. Your voltmeter should read the incoming voltage. The ACC yellow cable should be connected to the ignition. Now touch the voltmeter to the aluminium end of the YELLOW Add-A-Fuse to check the voltage. 24/7 Parking Surveillance Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot. 24/7 Parking Surveillance GKU Dash Cam Hardwire Kit - 12V-24V To... However, if your previously identified slot is empty and there is no existing fuse in it, then you can just install the Add-A-Fuse directly without needing to install 2nd fuse into the empty slot of an Add-A-Fuse tap. #479 in Car On-Dash Mounted Cameras Dash Cam Hardwire Kit, Type-C Hard Wire Kit 11.5Ft, 12-24V To 5V Car Dash Camera Charger Power Cord, Gift 5 Fuse Tap Cable With Battery Drain Protection For 24H Parking Monitor Fit The RED & YELLOW Fuse Taps To The Respective Slots RED: Now turn your car keys to ACC position.
