Drop and rise lengths will vary depending on hitch style (see drop/rise chart below). – Sway Bar Mounts: Same Rating as Like Type Mount Listing Above The Shocker combo ball mount was designed to fit everyone’s needs with a 2 & 2-5/16 welded dual ball and optional sway bar tabs for mounting friction sway control kits. Drawbar Mount attachment with 1 hole. – Pintle & Ball: 4″ Rise to 6., 5″ Drop | 8-Ton 16,000 lbs., (2″ Ball is 10,000 lbs)., – Drawbar: 3., 5″ Rise to 3., 5″ Drop | 20,000 lbs., – Clevis Mount: 1., 5″ Rise to 5., 5″ Drop | 20,000 lbs. XR Series 8 Hole Hitch Mount Drop & Rise + Rating Guide: (Add 1., 5″ if Using 10-Hole Frame) – Combo Ball: 4″ Rise to 4″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs. – Drawbar: 4″ Rise to 4″ Drop | 20,000 lbs. Each mount is 3-5/8 wide OD to fit a 3-3/4 hitch ID channel with a 2 on center hole pattern for 5/8″ pin. Designed for anhydrous tanks and farm wagons we have the drawbar or quad-cushioned drawbar mount. Tow capacity rating is 20,000 lbs. This collectible poster printed in 1989 to promote the release of Shocker, is not a reproduction or a reprint. Shocker Combo Multi Ball Mount Attachment For farm applications or military-style hitches, we have several different mounts available. This mount has 1-1/4 holes for farm applications. It does not have an MPAA rating box. – Sway Bar Mounts: Same Rating as Like Type Mount Listing Above. Fits 3-3/4″ Shocker Bumper Hitch Channel. Hitch Mount Spreader Shocker XR Cushion Adjustable Drawbar Hitch, Fits 2 Cameroon Shocker Drawbar Mount Attachment W/ 1 Hole Plate These Shocker Hitch ball mounts fit Shocker Bumper Hitches: Works with Shocker Air, Streamline & HD series bumper hitches & Shocker XR series hitches & Impact series cushion hitches. Ideal use is for hay wagons, anhydrous tanks and farm wagon Air Bumper Hitch Mount Drop & Rise + Tow Rating Guide – Combo Ball: 0″ Rise to 4., 5″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs., – Drop Ball: 4., 5″ to 8., 5″ Drop | 2-5/16″ ball rated at 20,000 lbs & 2″ ball rated at 10,000 lbs. Each mount offers a unique design to best fit your towing needs. Fits 3-3/4 Wide Shocker Bumper Hitch Channel. These sway tabs work with friction sway arms such as the Shocker 1001 sway control kit. – Pintle Hook: 6″ Rise to 6″ Drop | 10-Ton 20,000 lbs. The pintle hook fits 6 OD x 3 ID pintle rings and offers additional rise or drop when flipped. Mount Width: 3-5/8 wide OD to fit a 3-3/4 hitch ID channel with a 3 on center hole pattern for 5/8 pin for Shocker bumper hitches. Made in the USA by Shocker Hitch Jamestown, ND Drop & Rise Guide for Shocker Bumper Hitch Ball Mount Attachments Allows for quick hook up and disconnect. (This is NOT for use with hitch ball) – Clevis Mount: 1-1/2″ Rise to 6-1/2″ Drop | 20,000 lbs. It has never been folded. Drop range 1/2 to 4-1/2. Ball Mount Width: 3-5/8 wide OD to fit a 3-3/4 hitch ID channel with a 2 on center hole pattern for 5/8 pin for Shocker bumper hitches. Choose the best Shocker ball mount attachment that meets your truck and trailer needs Drawbar Hitch System (Cat. 1 (22mm)) No. holes: 9, 775mm
